Special steel abrasives
High Carbon Steel Cut Wire Shot
High Carbon Steel Cut Wire Shot is a high-quality abrasive produced from carbon steel wire. It is available in as cutcylindrical form or conditioned G1/G2/G3 rounded grades. The material complies with SAE requirements and is designed for blasting, rust removal, shot peening, and surface preparation.
- C: 0.45–0.75%
- Mn: 0.40–1.00%
- Si: 0.10–0.35%
- S: <0.045%
- P: <0.045%
- Hardness: 51–55 HRC (388–561 HV)
- Density: 7.8 g/cm³
- Tensile strength (1.0 mm): 1250–2150 MPa
- Shapes:
- As Cut — cylindrical
- Conditioned G1/G2/G3 — partially to fully rounded
0.3 mm • 0.5 mm • 1.0 mm • 1.2 mm • 1.5 mm • 2.0 mm • 2.5 mm
Custom sizes available.
- Blast Cleaning
- castings
- forgings
- sand removal
- steel plates
- H-beams
- steel structures
- Rust Removal
- cast and forged parts
- steel plates and profiles
- structural components
- scale removal
- Shot Peening
- gears
- heat-treated components
- fatigue-critical parts
- Shot Blasting
- steel plates
- structural profiles
- ship plates
- steel structures
- Surface Pre-treatment
- pre-painting cleaning
- preparation prior to coatings
- 25 kg bags
- 1000 kg pallets (40×25 kg)
- 1000 kg big bags
- Custom packaging available upon request
Hybrid Steel Mix
Hybrid Steel Mix is a high-performance operational blend based on angular steel grit produced from bearing steel and spherical cast steel shot, combined in precisely selected proportions. This mixture ensures high cleaning speed, consistent surface roughness, and a bright, clean, uniform finish without darkening or shadowing.
The elevated chromium content in bearing steel provides intermediate performance between traditional high-carbon steel abrasives and media used for stainless-steel blasting applications.
- Extended service life
- Angular grit is produced by crushing bearing steel without melting.
- Due to its forged structure and higher Cr content, its lifetime is at least 20% longer than that of cast angular grit.
- During operation, particles gradually form an arc shape, stabilizing the working mix.
- Higher blasting efficiency
- Spherical shot increases flow velocity and boosts cleaning intensity.
- The combination of angular and spherical particles delivers fast, powerful, and uniform blasting.
- Clean and homogeneous surface
- Reduced risk of dark spots, shadowing, or surface contamination.
- Ideal for stainless steel and alloy steel processing.
- Cost efficiency
- Lower consumption per m².
- No need for equipment modification or turbine adjustments.
Typical Chemical Composition:
C: 0.70–1.20%
Si: 0.40–1.20%
Mn: 0.40–1.20%
S: <0.05%
P: <0.05%
Cr: 0.6–1.6%
Physical Properties:
Hardness: 40–50 HRC
Shape: angular steel grit + spherical cast steel shot
Density: ~7.5 g/cm³
Bulk density: 4.8–5.0 g/cm³
Available Sizes:
0.4–0.8 mm (recommended 0.4–0.5 mm)
Other sizes available upon request.
- Blasting of stainless and alloy steel products
- Scale removal
- Cleaning of sheet and coil material
- Surface preparation before coating
- Turbine and pneumatic blasting systems
- 25 kg bags
- 1000 kg pallets (40×25 kg)
- 1000 kg big bags
- Custom packaging available upon request
Stainless Steel Cut Wire Shot
Premium abrasive for precision blasting, cleaning and finishing
Stainless Steel Cut Wire Shot is a high-performance abrasive produced by cutting stainless steel wire and optionally conditioning it into a perfectly round shape. Manufactured from AISI 304, 201 or 430 grades, it offers exceptional corrosion resistance, minimal dust generation and extremely long service life.
This media is ideal for aluminium, stainless steel and non-ferrous materials where cleanliness, brightness and contamination-free processing are critical.
- No corrosion or staining on treated surfaces
- Perfect shape consistency → uniform blasting profile
- Very low dust thanks to high durability
- Extremely long lifespan compared to cast stainless shot
- Pure chemistry — no carbon contamination
- High impact resistance due to wire-drawn structure
- cleaning and finishing of aluminium, stainless steel, titanium
- matte finishing, satin finishing, polishing
- oxide and scale removal without discoloration
- pre-treatment before painting or anodizing
- delicate components, thin-walled parts, medical tools
- food, chemical and pharmaceutical industries
Parameter | Value |
|---|---|
Material | AISI 304 / 201 / 430 |
Shape | Cylindrical or Conditioned Round |
Hardness | 32–50 HRC (≈300–500 HV) |
Tensile Strength | 1300–2200 MPa |
Density | ~7.8 g/cm³ |
Bulk Density | ~4.5 g/cm³ |
Size Range | 0.1–1.5 mm (others upon request) |
Standards | ISO 11124, SAE J441/J444 |
- 25 kg bags
- 1000 kg pallet (40 × 25 kg)
- 1000 kg big bag
- custom packaging upon request
Get In Touch
With Us!
General inquiries
45 Fabryczna street
43-100 Tychy, Poland
NIP: 783 177 1904
REGON: 369 402 480
KRS: 717064
+ 48 577 870 572
info@metacoreglobal.com
Purchasing Department
purchasing@metacoreglobal.com
Warehouse & Logistics
6 Mrozowa street 31-752, Krakow, Poland
+48 531 348 111 logistics@metacoreglobal.com
Sales Department
sales@metacoreglobal.com
2026©Meta Core Global, All rights reserved | This website has been thought and designed in an eco-friendly way | Privacy policy | Legals